Showing posts with label radical. Show all posts
Showing posts with label radical. Show all posts

Saturday, October 30, 2010

Tuesday, October 19, 2010

Reader Ride. Some Sweet Suzuki SRAD Fighter Action

Joe Dunderdale sent in this great Streetfighter build.

He writes:
I thought I'd send you a few pictures of my bike.
Its a 1998 GSXR 750 SRAD Street fighter, a modern interpretation of the Cafe Racer and in my opinion by definition a bike that is lighter and kicks out more power than its stock counterpart.


Specs:
1998 GSXR 750 SRAD FRAME
2001 GSXR 1000 ENGINE, HARNESS, CLOCKS, FUEL PUMP RETROFITTED IN THE 98 TANK.
LASER CUT SUBFRAME, ENGINE MOUNTS,
YOSHIMURA TRS SHORTENED TO 300 MM
KX MOTORCROSS BARS, CUSTOM BAR MOUNTS


147 HP 60LBS LIGHTER THAN THE 2001 GSXR 1000

That is freaking awesome! I love the raw metal look.  Thanks for the pic!

Thursday, October 14, 2010

Radical Ducati Hypermotard Custom!

From the "bikes you don't see every day" department...  For the full story on the bike (and the for sale ad) see ADV Rider HERE




Tuesday, October 12, 2010

Thursday, September 23, 2010

Reader Ride Carry Over From The 2- Stroke Blog. Outrageous RZ350 Custom

Jeff Strom Sends in Some pics of his buddies bike (that I think I've seen before). And What a beauty it is.  Those pipes are pure porn..

He Writes in:

Hey,
Love your blog, thought I would suggest a bike. I rode with
Mark (who built and owns this buzz bomb), with some triples,
about a month ago. This bike runs as sweet as it looks ...
Also found right here ...
http://kawasakitriplesworldwide.com/phpBB2/viewtopic.php?f=8&t=55493&start=3
4
... keep your bitch'n blog going, it's a regular stop for me!
Cheers,
Jeff Storm
(aka: K_trip - with that green '74 H2)

No Problem Jeff.  Thanks Much for the great shots!






Sunday, September 19, 2010

Reaader Ride with "Bonus Triumph Pics.

Aaron sent me a nice silhouette shot of his stable the other day along with a link to his flickr stream.  While perusing his photos I stumbled across this stunner of a custom Triumph Scrambler.  WOW!  Aaron I hope you don't mind (and if you do I'll pull them immediately) but I'm a huge Triumph fan and couldn't pass these up. 

By the way your original submital is excellent and included below. I'd love to see more angles of the Duck and especially Beemer.

Thanks Very Much

Aarons original note:
Hey!
I got a bit inspired on Sunday and had some fun with my DSLR and Photoshop; I ended up with what I think is a very good photo of my two bikes ('75 BMW R75/6 and '06 Ducati Multistrada 1000s) that you and your readers might like. The original is attached, and other sizes are at my flicker acct (under a Creative Commons license, so feel free to use what you like), here:
Cheers!
---Aaron


Here's the shanghaied Triumph...




And the original submittable.  Excellent Shot!

Wednesday, September 15, 2010

Reader Ride. BADASS DR650 Streetfighter / Motard.

Mike Sternick writes in:
Good Morning,
Its a 2003 Suzuki DR650 with a few mods and it gos like stink!
Cheers!

Later he updated me with some build details:
Hey Steve,               
Thanks for your comments.Like you said great handling bike just cluttered and a little ugly.The rear rim is a stock 17" the front I changed to 18" it balanced the profile and lowered it an inch.The front and rear suspension were lowered 3" and still has 7" of travel.I cut about 12" off the back frame and welded a new hoop.Seat pan is stock with new foam.The tank is off an old Harley and mounted like the factory. The exhaust, side panels and head light bracket are all one off made by me.The oil cooler I remounted off the front of the frame.All the old tabs were cut and ground off to clean up the frame.The stance of the bike came out perfect and I can still lower it an inch front or rear. The motor is stock except for the pipe,jet kit and K&N filter.Tires are Scorpion A/Ts.The bike is for sale so I can start a new project over the winter.

I'm not interested in becoming a for sale site but if anyone's interested I'll get you Mike's Contact info. I think it great and I'd seriously consider buying it myself but I've alead got a DR650 (much more stock) that I'm modding.







Tuesday, September 14, 2010

Wednesday, September 8, 2010

Monday, May 3, 2010

Reader Submittal. NCR Ducati Hypermotard.

Richard Shatto writes in:
Last Sat. I was in San Rafael (See Hattar Motorsports on facebook about the build) & spied this bike. Let me tell you that NCR does not stand for National Cash Register anymore. It stands for a ridiculously light, (& obscenely expensive) Carbon fiber & Titanium custom Ducati Hypermotard. I have to say one of the most desireable bikes I've ever seen, & quite an accomplishment to shave almost 100lbs. off an already very light bike. (286lbs, 96Ft.lbs Tq, 120 Horsepower.) The owner (a former short track racer) says he can't even describe what it's like to ride...I'll bet... Should be in an upcoming Cycle world.


Pure Porn. Thanks!







Tuesday, April 27, 2010

Reader Ride! One hell of a custom Yamaha SR500!

Mike C sends in these pics of his stunning SR500 custom.  As a person who's been known to overbuild a few small CC bikes myself I really like this.

Mike includes his build sheet:

Here are some snaps of my 1978 Yamaha SR 500, hope you like them:
Front forks:'94 GSXR 750
Front 'fairing': Modified aftermarket fiberglass Yamaha R6 front fender
Headlights: Modified 18 wheeler back-up lights
Wheels: '94 Yamaha FZR600
Rear monoshock: '94 Yamaha RZ350
Muffler: Modified Toyoya Camry resonator (center section from a Harley, front section is a Kerker).
Oil cooler: Shop class project a buddy made for me
Front master cylinder & clutch lever: Honda CBR 900
Rear master cylinder: Honda CBR 600
Rear brake caliper: '94 Kawasaki ZX 750
Chin fairing: Home made fiberglass copy of RZ 350 part
Vapor catch tank: Modified reciever/dryer from Camry ac system
Kick starter: Yamaha XS 650
Tail piece: Fiberglass home-brew
Rear fender; Fiberglass home-brew
Gas cap: Yamaha YSR 50
Tailight; Marker light I 'borrowed' from a school bus
Seat is a cut down stocker using a upper shock mount at the rear
Speedo; Yamaha RZ 350
Mag cover: Kedo in Germany
Oil filter cover; Motolana Thailand
Cam chain adjuster cover; I forget the company name, but it came from New Zealand
Rear sets;Home-brew combo of the old buddy pegs from my '85 GSXR 750 and some nice alloy stock I found in a parking lot =-)
Bar end mirrors; Metal copies of some I found at a bicycle shop
Motor running early TT500 points type ignition & magnetto lighting
Voltage regulator from a snowmobile
Etc., Etc., Etc......
If you like, you can follow these links for more:
http://www.sr500forum.com/forum/viewtopic.php?f=15&t=415


http://www.sr500forum.com/forum/viewtopic.php?f=15&t=2185


Thanks for your time ......Mike C.


Great Stuff.  Thanks Much for the pics and info!








Related Posts Plugin for WordPress, Blogger...